Clean Glass Shower Doors

Here Is how to clean glass shower doors

A sparkling clean bathroom is what every homeowner dreams to achieve. You may install beautiful tiles and high-quality accessories to make it look gorgeous. However, if your shower doors are always unclean, the bathroom will always look dull. Cloudy shower door glass and shower glass walls can make an otherwise clean bathroom look dirty. You may have a glass shower door too. If you do, you know that it can feel like a never-ending battle to keep it free from stains and spots.

Also, not to mention the soap scum forming on the glass. Cleaning shower glass will take effort, supplies, and a regular cleaning schedule. It may sound like a load of work; however, it is not.  You can use the techniques you learn from this article to keep your shower door sparkling.  Properly cleaning the shower door will make the whole bathroom shine.  Scroll through to find out how to clean glass shower doors in your bathroom.

Clean Glass Shower Doors

How To Clean Glass Shower Doors In Your Bathroom

Most issues with showers occur because of how your home’s water reacts to your soap.

Note that hard water reacts with paraffin wax, usually used in bar soap.  This soap may clean the dirt off you well. However, the downside is that it leaves behind a residue on surfaces in the form of scum.  After you finish your shower routine, the wax settles on the glass.

You may want to know how to remove water spots from glass shower doors?

Of course, having hard water depends on where you live. So it can be challenging to change. However, you can quickly get rid of the hard water stains with materials you find around the house. You can also use various techniques to decrease the number of spots in your shower.

Properly cleaning the scum and stains from your shower will restore the glass’s shine. The good news is you can use homemade mixtures to do this. You may not even have to spend a lot of money on expensive products. You can instead use vinegar, ammonia, and baking soda. Those are fantastic cleaning agents, some of which must be sitting right in your kitchen.

Scroll through to see how you can use the ingredients to clean your shower doors.

Clean Glass Shower Doors With Vinegar

Ever wonder what hotels use to clean glass shower doors? Glass shower doors in hotels are super clean, You wish you could get the same squeaky spark on your bathroom doors as well? Well, for the same effect, we recommend the natural method using vinegar.

For this method, you have to use distilled white vinegar. It is cheap and readily available, and it offers an all-natural alternative to expensive cleaning products. Other than that, this method is simple to learn.

  • Add equal parts of warm white vinegar and liquid dishwashing soap in a spray bottle. Then shake well to combine the ingredients.
  • Next, spray it on a small area with the sponge first to avoid scratching the glass.
  • After making sure it does not scratch the surface, you can spray the solution onto the glass door. Then wipe off using a soft cloth. The soap will cut through grease, while the vinegar will remove the residue.

One more way to use vinegar is to combine it with tea tree oil. Use undiluted white vinegar with several drops of tea tree oil. Tea tree oil is antibacterial and safe to use.

You can also use vinegar to clean out the scum in the tracks of the sliding glass door. You can cover the drain holes using paper towels and add white vinegar into the slots. Let it sit overnight. The next day, you can remove the paper and wipe out any excess vinegar.

However, if you have stone anywhere in your shower, do not use vinegar. That is because vinegar can harm the stone.

Also, remember never to use vinegar or ammonia to clean a shower simultaneously as bleach. The combination can produce toxic fumes.

With Baking Soda

Combine baking soda with just enough water to create a thick paste. Start by mixing a half cup of baking soda for a shower door. You can use more if you have a large glass shower enclosure. Once you get the right consistency, apply the paste onto the shower using a clean cloth. Then wash it off using vinegar.

Alternatively, you can create a paste by combining baking soda with vinegar. Then apply this onto your shower glass.  After that, you have to wait for 20 minutes and rinse it off.

How To Clean Glass Shower Doors Using Ammonia:

First of all, remember to get enough ventilation when working with ammonia. You can start by opening the bathroom door and windows. You can also operate the vent to get additional ventilation. Other than that, wear rubber gloves and long-sleeved clothes to avoid it from touching the skin. Also, remember not to mix ammonia with bleach. It can create dangerous fumes.

Suppose you find heavy scum on the shower doors. In that case, you can combine three parts of water into one aspect of ammonia. Put the ingredients in a spray bottle. Then spray the glass surface and scrub it while still damp using a brush. Remember to rinse well and dry the glass entirely.

What if you do not have a thick layer of built-up soap scum? Here, you can mix two quarts of water with two tablespoons of ammonia. Remember to use distilled water to avoid hard water stains. You have to spray this solution onto the glass and let it sit for five minutes. Then wipe down using a dry microfiber cloth.

How To Clean Glass Shower Doors With Lemon Juice:

This method is a fragrant alternative to vinegar. You have to mix a cup of distilled water with the juice of three lemons. Then spray the mixture on the door and wait five minutes. After that, wipe the surface off using a clean microfiber cloth.  Dry the glass surface well using a fresh towel.

Lemon Juice

Let us see another way to use lemon juice for cleaning your shower door. You have to dip the cut side of a lemon half in baking soda. Then rub the lemon on the glass surface. After that, rinse and dry the surface with distilled water. To reduce soapy buildup, layer the interior of the glass with some lemon oil.

How To Clean Glass Shower Doors Using Dryer Sheets

You do not have to throw away any used fabric softening sheets from your dryer. Instead, use them to clean your glass door. The sheets will effectively remove soap scum and save you the time of mixing a cleaning solution. You can always use new dryer sheets. However, used ones work so well too.  It is worth keeping them in a  basket after taking them out of the dryer. Wet one down with water and wipe off soapy layers from the glass, the frame, and the handle. After that, you can apply some lemon oil to finish it off.  It will make both the glass surface and the metal shine.

  • Add a Little Vinegar

If the dryer sheet does not remove all the white streaks from the door, they are mineral deposits left by hard water. Those will not come off with dryer sheets or soap and water, but vinegar will remove them. After wiping down the dryer sheet, spray the door with full-strength vinegar, wipe it off and rinse with water. You are now ready to make the shower door shine with a coat of lemon oil.

How Can you Keep A Glass Shower Door Clean

Hard water stains can appear on the glass door when water drops dry there. What you can do to keep the glass clean is not to let the water dry on it in the first place. Below are some effective tricks you can try to keep your glass shower door clean:

  • Leave your shower glass door open after you finish showering

Once you are all clean, leave the shower door propped open. That way, the moisture can evaporate, and the air can circulate fast. It is a super-easy way to prevent your shower glass from getting dirty. When the moisture evaporates quickly instead of sitting on the glass, it will prevent mildew.

  • Clean regularly

Perhaps the most important measure to keep glass shower doors clean is following a regular cleaning routine. Plus, you will reduce the time you need to spend deep cleaning. Glass shower doors in hotels look squeaky clean because of regular cleaning. Of course, it may not always be possible to clean your shower door every day. However, you can spare a little time and follow a steady cleaning schedule to do it.

  • Wipe the water from your shower door using a squeegee

You can clean the glass with a squeegee after every use. When cleaning, you can start from the top of the glass and drag it downwards to remove excess water. Squeegees have a flat rubber blade. So they are great for removing the excess water on your shower glass. It will prevent the glass from getting dirty from soap scum buildup. Make sure to follow this tip after each shower.

  • Dry the glass with a towel after you finish showering

You can use a fresh towel or microfiber cloth to wipe down the shower glass. Do this after every shower you take. It will get rid of any moisture buildup and remove soap scum on the surface too. Note that it is best to use a squeegee before you wipe the glass dry using a cloth.

  • Use liquid soap instead of bar soap

Using bar soap can create more soap scum that ends up on your shower glass. So you can opt for liquid soap to wash in the shower. That way, it is easier to clean up and does not leave a lot of residues. Other than that, try to avoid using oily shower products as well.

  • Apply a water repellent spray to your shower door

Get a water repellent spray that is safe for your glass. You will be able to find one at a home improvement store or online. Follow the instructions that come with it. You can spray the water repellent over the glass surface in an even layer. That way, the water will run off of it. After that, let it dry for the recommended amount of time before taking your shower. You can use a repellent spray like Rain X to keep water spots off the glass.

  • Install a water softener in your plumbing

The excess minerals in your water can make your shower get grimier quickly. So how can you ensure you are using clean water? Well, you can get a water softener that you can install to filter out the minerals. Of course, it is an expensive option. However, it will solve a lot of issues by reducing mineral buildup on your shower glass. Also, it will prevent mineral buildup inside of your pipes and showerheads as well. You can buy a water softener at any local hardware or home improvement store.

Always remember to follow the instructions that come with the equipment if you are installing it yourself.

How To Remove Thick Soap Scum Off Your Glass Shower Doors

If your shower door has a thick coat of residue on it, you will need to put in more effort.

You can start by moving the shower door into a safe and well-ventilated work area. Use brass polish or some other similar polishing compound and an auto buffer. If in case you do not have an auto buffer with you, you can rent one. This tool and brass polish can help to cover any marks on the glass caused by the residue.  If the buffer and polish do not remove the mildew and spots, you may need to replace the shower door.

Note that using a buffer is one of the last resorts of cleaning glass. So it is better to try other methods to clean your shower doors first.

How To Cleanse The Plastic Strip At The Bottom Of The Shower

The plastic strip is one of the forgotten parts when it comes to cleaning. First of all, note that if left uncared for, the plastic strip gets damaged. So what is the purpose of it? Well, the plastic strip is there to hold all the drips. You can, of course, remove it for cleaning. It needs cleaning consistently to prevent the buildup of mold. So we will detail exactly how you can clean the strip.

Here are the supplies you will need:

A pair of gloves (you can use disposable ones here}

a butter knife

a teaspoon

a fork, and a butter knife

an old toothbrush

a lemon

some baking soda

white wine vinegar

a double-sided sponge

Once you find all the supplies, we can get to work. Follow the instructions below to clean the strip.

Step 1: Remove the plastic strip

Before you begin, do not forget to put on your gloves.

Then, push the shower door over the bath momentarily as you bend down and slide the strip out from below and pull it out gently. Make sure to work slowly to prevent disgusting green mold splattering all over the place.

Step 2: Rest the strip in the bath

Now the strip is out of the way. At this point, you can wipe away the mold that clings to the bottom of the door even after removal. You can place the strip in the empty bath until you finish cleaning.

Step 3: Wipe the mold off the bottom of the shower door

Now dip the teaspoon into the baking soda. Remember not to do this the other way around by pouring, though. That is because you will end up spilling the baking soda. So using the teaspoon, spread the baking soda across the coarse side of the double-sided sponge. Then you can apply it all over the abrasive side.

Cut your lemon and squeeze one half onto the teaspoon. Then spread the liquid over the sponge. After that, you can wipe off the door. Also, if you notice excess mold, you can use vinegar and go back in to wipe it again. Here, use a cap-full of vinegar.

Step 4: Pre-soak the strip

You can press the same sponge you used before. It may seem like this will not remove much mildew at this point. However, it is essential to pre-wipe it. That way, you are letting the solution begin to work on the mold. Note that the strip is a vessel itself. So you will have to make the most of its capacity to hold liquid. However, before anything, you have to put two clumps of lemon peel to hem in liquid at each side of the strip. That way, it becomes entirely sealed.

Step 5: Let the strip sit

You can put a couple more teaspoons of baking soda, lemon juice, and a cap-full of vinegar. Then gently fill the mixture into the now sealed strip. After that, you have to let it rest in the bath. You will have to wait for about 4 to 5 hours.

Step 6: Chip away at the residue

After a few hours, you will notice that the mixture has been working. You will see how it has been eating away at the mold. Now you can grab a fork and chip away at the mold. You can use a butter knife here. That is because the smooth flat shape can help scrape the sides of the strip from left to right. After that, you can use an old toothbrush as well. The bristles on the brush can reach all over and loosen any stubborn spots.

Step 7: Wash off, dry and place strip to shower door

Before putting the strip back on the door, you have one more step. So grab the sponge and comb over the strip. Proceed to do so until any stubborn mold is gone. Using the hot tap in the bath, go ahead and apply hot water to the sponge. Then comb again until all the mildew is gone completely. Next, remove the lemon peels from the sides and wash them off once more.

Then, turn the strip upside down and set it to dry for 4 hours. Make sure to let it dry in a well-ventilated area. You can keep it outside pegged to a clothesline. Once the 4 hours are up, check if it is dry entirely. If it is, then you can place the strip back on the shower door.

How To Clean Glass Shower Doors In Marble Shower

One method to clean shower doors in a marble shower is to buy a marble cleaner product. You can choose to do so if you like or if your manufacturer’s instructions mention it. Alternatively, you can choose to do a DIY method to clean a marble shower.

Below are the supplies you are going to need for this DIY:

  • One tablespoon of mild dishwashing liquid
  • Water
  • A spray bottle
  • Lint-free cloth

Marble Shower

By following the following steps, you will be able to keep your marble shower looking nice. Make sure to make time to clean the surfaces as often as you can.

1st step: Add the dishwashing liquid into the spray bottle. Then add warm water, filling the remainder of the bottle.

2nd step: Shake the bottle well to mix the two ingredients.

3rd step: Proceed to spray the shower’s marble surfaces with the solution.

4th step: You can use vertical or horizontal strokes to rub the mixture onto the shower walls gently. Always pay extra attention to areas with soap scum and stains. However, remember not to apply the soapy solution to the stone. Remember to use the mixture only to clean the surface.

5th step: Now, you can wash the mixture off of the marble shower surfaces with water.

6th step: Finally, you have to dry the surface. So grab a lint-free cloth and wipe down shower surfaces until they are dry.

Final thoughts

Now you must have a better understanding of how to clean glass shower doors. Of course, it will take a few tries to figure out what works best. However, practice makes perfect!  So take your time. On your first try, you can use vinegar to clean the glass doors. After that, you can try lemon juice. Also, remember that you cannot clean the shower doors once and forget about it. It is crucial to clean it as often as possible. So make sure to stick to a regular cleaning routine. That way, those hard water spots will not stand a chance! It will not take much time or energy if you clean it as regularly as possible.

Remember that a regular cleaning schedule is a key to keeping your glass doors nice and clean.

You will be able to make your bathroom look sparkly clean in no time!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *